Industrial and Manufacturing Water & Sewage Services

Our experienced commercial pipe installers can work with most sizes and types of pipeline on your site and can conduct responsive repairs or project based activities up to the value of £450,000. Our services are endorsed by Wessex Water and their commercial team.

We are able to install or repair the water incomer / incoming mains, ground services, water supply pipelines, process pipework, stainless steel / hygienic pipelines and liquid waste handling pipework. Fluid flow calculations and fluid dynamic calculations can be done if required.

To reduce downtime or interruptions we will schedule our works around your shut-down or maintenance schedules where possible.

We will produce a full set of Method Statements and Risk Assessments for any job we do on your site. In addition to pipe fitting our engineers can undertake minor civils works to install drains, manholes, and inspection chambers. We are up to date on water regulations and current legislations so you can be sure that what we so on site will be fully compliant.

Getting us set up on your purchasing system will not be a problem. We hold £10m Public Liability Insurance and are registered with CHAS, Exor and Constructionline. Our dedicated admin team regularly complete this type of paperwork and will happily take care of it.

We have undertaken work on a wide range of industrial and manufacturing sites including Breweries, Dairies, Foundries, Factories and Power Stations.

We can install complete systems from start-to-finish. Potable or raw water from source, whether mains, borehole or spring, through to the point-of-use. Foul sewage systems from your gullys and traps to the sewage treatment plant, sewage pumping station or connection to the public sewer.

We are equally happy to extend your existing systems as you require, but we cannot offer to install steam or compressed air systems.

  • Pipes and services from 25 – 300mm in mdpe, hppe, copper, steel, iron, etc.
  • Mains, raw, softened and other process pipework in all sizes and materials
  • Stainless steel / hygienic pipelines
  • Control valves; ball, gate, sluice, butterfly, etc.
  • Hydrant valves & air valves
  • Fully Water Regulation compliant systems
  • Liquid waste handling pipework
  • Minor civil engineering works
  • Water storage tanks and reservoirs
  • Water treatment
  • Meters, Automated Meter Reading (AMR) systems
  • Sewage treatment plants and pumping stations
  • Soakaways, horizontal flow reed beds & vertical flow reed beds

You may be considering supplementing your existing water supply by seeking your own source. Commissioning your own borehole could provide you with up to 20 cubic metres of water per day. Larger volumes may be possible subject to obtaining an Abstraction Licence from the Environment Agency. We can assist at all stages of the borehole commissioning process, form the initial hydrogeological survey through yield testing and licensing to installation and use.

You can take advantage of our responsive or planned industrial repair services. Our responsive repair vehicles carry light plant, leak detection equipment and a range of fittings that enable them to find and repair leaks on most common sizes and materials of pipework anywhere inside your production facility or underground.

For planned repairs or on-going problems we will arrange for one of our engineers to visit your facility to assess the situation and provide ways forward and costs. The works can be scheduled around working hours, shut downs or out of hours if required.

Leak Detection & Repair Services for:

  • Stainless steel / hygienic pipelines
  • Process pipework in all sizes and materials
  • Liquid waste handling pipework
  • Water Storage & Treatment equipment

Additional Repairs:

  • Water Meters repaired and replaced
  • Water & Sewage pipe repairs
  • Pump repairs
  • Control Valves, Hydrants and Stop Cocks repaired
  • Pressure & Flow problems resolved

As a trusted partner we offer you a comprehensive service based on delivering long term value to your assets. If we believe we can improve on the original instruction we will advise you and allow you to make an informed decision based on our findings.

Our servicing contracts are tailored to your asset portfolio and we have the resources to manage a single property or several hundred. We can service:

  • Sewage treatment plants
  • Pumping Stations
  • Water Treatment Plants

We also undertake:

  • Legionella Sampling
  • Routine Water Testing

Please contact us with a description of the equipment or make, model and serial number if available and we will produce a quote to service the equipment to the manufacturers specifications.

Our Chartered Engineer can provide you with advice on water and sewage systems, including;

  • Storage; reservoir, tank and wet well selection
  • Pipe sizing; mains, drains and sewer laterals
  • Pressure regimes; booster pumps and pumping stations
  • Water and sewage treatment

Our complete service includes design, specification and detailing of systems.

As well as system design our Engineer can provide guidance on specific needs concerning system performance such as;

  • Water; poor pressure, low flow, leakage and wastage
  • Sewerage; periodic blockage, surcharging, effluent quality, or smell.

We can also survey and map your services for you and produce schematics in .pdf or AutoCAD format for you.

Industrial and Manufacturing case Studies

I was very pleased with the work Pipefix did for us. They found and traced a substantial underground leak with minimal disruption to our production process.

Jim King
Finance Director – Lyons Seafoods

About Us

Services

Sectors

Get in Touch

Follow

Contact Us

The company is run by a committed team with a strong emphasis on family values, best practice and quality.